Get a free estimate! 
Call Now: 01442 780 109

The Solid Oak Man/Km Hybrid Ltd 2015 - ALL rights reserved

Bespoke & Handmade Solid Oak Fireplace Surrounds

 

We can cut to any measure or combine a variety of beam size you require so don’t feel you have to have the size listed - please get in touch for a very competitive quote.

Placing an order - we are here to help you out with your project, please have a look below at various options available, although you are more than welcome to drop us your own design and we'll have a go with it;) 

If you are not sure what size to choose, please advise the surround type you like most, send us a pics of your fireplace, along the opening width and high, hearth width and we'll be able to make some suggestions.

 

When contacting us about the surround, please advise:

1 - Surround type

2 - Wood Grade (Rustic or semi rustic)

3 - Edge profile (Scalloped/rounded, straight/smoothed out, rounded/even, penciled)

4 - Finish (Untreated, Danish Oil, Clear Hard Wax Oil or Teak oil)

5 - Sizes as per sketch drawing (A, B, C and so on)

6 - Rebate size if you need one (you would if you have a cast iron insert or a stone/marble backplate) we would need to    know the backplate width/high and how much is it protruding from the wall

We can create your fireplace surround to your desired size using various beam sizes to suite your taste.

As everyone is made to measure, Prices for standard sizes below - YOU can change any of the sizes and we'll quote on individual basis:

 

BUYING/ORDERING - Once we've agreed on all the details and you are happy with our quote, we'll issue PayPal payment invoice or let you have our Bank details for direct BACS transfer. (Sorry - we don't take your card details over the phone )

It usually takes us up to 3 weeks to deliver your bespoke surround, although in quieter months its normally 2 weeks.

PLEASE READ

                       Presented beams and boards/shelves ARE characterful beams and boards, SOME contain splits and CRACKS caused by the natural drying process, most contain knots, swirls and other imperfections; EACH ONE IS DIFFERENT - some more rustic than others - the photos show typical examples in various treatment and edge profiles. If you need specific grade of your oak (cracks, knots free) or more rustic than normal, please get in touch before placing an order, otherwise we will send randomly chosen grade. 

                      

                       As Oak is a natural product each piece may be different in appearance and slightly in colour. Our character beams may already contain surface cracks, knots, pin holes, & waney edge. Although air dried, it is not unusual for the oak to develop further shrinkage, movement, splits and cracks as it acclimatises to your properties temperature.

 

                        We recommend that if the beams are going above a log burner, fire or any intense heat, that the heat should be gradually increased over a period of a week or more if possible. All of the above points will not be accepted as defects, as character beams all of the above only enhance the beautiful natural characteristics of the oak.

 

                        Our oak beams are well seasoned, air dried oak from SUSTAINABLY MANAGED forests of Europe. Each piece is totally individual with different characteristics in every single piece, they can be used as they are or cleaned down, prepared and finished in many different ways to suit your particular taste. AS THE OAK fully dries and adjusts to your room environment more CRACKS AND SPLITS MAY APPEAR, ADDING TO IT's BEAUTY, character AND rustic appearance

 

                         Pictures shown are specimen only, to show the general look of the beams. Each piece of timber is totally unique with regards to grain, knots and other characteristics. We hand select our beams and try to use pieces with as much character as possible, this may include minor blemishes, pin holing, mature knots, splits, shakes, minor bends or twists. Please be aware of this before ordering. We have a wide selection of beam listings, it may be worth taking a look at some of our other listings showing finished beams to get a much better feel for the look of our beams once finished. If you have specific requirements then please contact us before placing your order to make sure we are both happy. Alternatively, please ask us for a picture to be emailed to you before dispatch

Classic Fireplace Surround - 36"/36" inside opening POA

This is our most basic Surround we do, comes flat packed, but all the fixings needed are provided,

The mantel length is 134cm/15cm wide and 7,3cm thickness

The uprights are 91,5cm high, 12,5cm wide and 7,3cm thick

Inside opening is adjustable

3" Arched or Straight Cross-board Fireplace Surround - 36"/36" inside opening, POA.

 

Hand made edging or where possible we keep natural waney one, comes flat packed, but all the fixings needed are provided,

The mantel length is 134cm/15cm wide and 7,3cm thickness

The uprights are 100cm high, 12,5cm wide and 7,3cm thick

Inside opening is set at 91.5cm but please advise yours if any different

Heavy Weight Fireplace Surround - 36"/36" inside opening, POA.

Our biggest surrounds, comes flat packed, but all the fixings needed are provided,

The mantel length is 138cm/15cm wide and 15cm thickness

The uprights are 91.5cm high, 15cm wide and 15cm thick

Inside opening is set at 91.5cm but please advise yours if any different

2" Arched or Straight Cross-board Fireplace Surround - 36"/36" inside opening, POA.

 

Hand made edging or where possible we keep natural waney one, comes flat packed, but all the fixings needed are provided,

The mantel length is 134cm/15cm wide and 5cm thickness

The uprights are 100cm high, 12,5cm wide and 5cm thick

Inside opening is set at 91.5cm but please advise yours if any different

4" Arched or Straight Cross-board Fireplace Surround - 36"/36" inside opening, POA.

 

Hand made edging or where possible we keep natural waney one, comes flat packed, but all the fixings needed are provided,

The mantel length is 138cm/15cm wide and 10cm thickness

The uprights are 100cm high, 15cm wide and 10cm thick

Inside opening is set at 91.5cm but please advise yours if any different